Home / Heat pump installation cost / Merrimack, NH

Merrimack · Hillsborough County · labor +19.8%

Heat pump installation cost in Merrimack, NH

A 2,000 sq ft home heat pump in ducted air-source heat pump comes to about $11,000 to $22,000 in Merrimack once the national installed price is adjusted for what HVAC mechanics and installers earn locally. The town's fee schedule names this work puts the permit at from $110 for a job at the midpoint.

Figures checked October 20, 2026 · sources

123
  1. 1Ducted air-source, 2,000 sq ft home $11,000–$22,000
  2. 2Labor index +19.8% vs US
  3. 3Merrimack permit from $110
Estimate, 2,000 sq ft home
$11,000–$22,000
Midpoint $16,500. National range $10,000–$20,000.
Merrimack permit
from $110
from $110 at the low estimate, from $110 at the high one.
Labor index (HVAC mechanics and installers)
+19.8%
Manchester-Nashua median $35.14/hr vs US $29.33.

Change size or material All Merrimack projects

Heat pump installation prices in Merrimack by material

Each row starts from the installed price per home published in a national cost guide, then moves only the labor part of that price by Merrimack's labor index. For 2,000 sq ft home:

MaterialNationalMerrimackMidpoint
Ducted air-source heat pump$10,000–$20,000$11,000–$22,000$16,500
Ductless mini-split heat pump$2,000–$17,000$2,200–$18,700$10,450
Ducted air-source$11,000–$22,000Ductless mini-split$2,200–$18,700
Heat pump installation in Merrimack, NH, for 2,000 sq ft home: low and high estimate by material after the local labor factor. Bars to scale on one axis from $0.

The ducted row is priced from the guide's table for a 2,000 sq ft home (3 tons). The ductless row is the guide's range for one system of any size, from a single head to several zones, which is why it is so wide.

By size

Home size (sq ft)Merrimack estimatePermit at midpoint
1,000 sq ft home$6,600–$9,350from $110
1,500 sq ft home$8,800–$11,550from $110
2,000 sq ft home$11,000–$22,000from $110
2,500 sq ft home$13,200–$24,200from $110
3,000 sq ft home$19,800–$27,500from $110
3,500 sq ft home$22,000–$30,750from $110
4,000 sq ft home$24,200–$35,150from $110

Ducted air-source heat pump.

Permit fee in Merrimack

Named in the schedule The fee schedule names this kind of work.

“Furnace, Boiler, Mini Splits, etc. (total system change) $75.00”

“HVAC Duct or AC line to Furnace, Mini Splits, etc. $75.00”

“Application fee: Applies to all permits below (non-refundable) $35.00”

Applied to a 2,000 sq ft home heat pump estimated at $11,000 to $22,000, that gives from $110 to from $110, about 0.67% of the midpoint price. Among the 14 towns on this site whose schedules cover this work, Merrimack ranks 10 from the cheapest; Fitzwilliam is lowest at $50 and Newport highest at $202.81 for its own midpoint job.

Fitzwilliam$50Manchesterfrom $55Bow$75Conway$75Hudson$75Londonderryfrom $75Portsmouthfrom $75New Ipswichfrom $100Newbury$100Merrimackfrom $110Salem$111.50Exeter$135.77Durham$170.07Newport$202.81
Permit fee each town's schedule gives for the midpoint heat pump estimate in that town (2,000 sq ft home). Bars to scale from $0; "from" marks a minimum fee.

Schedule: Town of Merrimack, NH Code Enforcement & Inspection Fee Schedule (effective January 1, 2025). The building department decides whether a permit is required and what valuation it accepts; the national guide puts heat pump permits at $50–$300.

Why Merrimack differs from the national price

Merrimack is in Hillsborough County, which the Bureau of Labor Statistics counts in the Manchester-Nashua, NH metropolitan area. The median wage there for hVAC mechanics and installers is $35.14 an hour against $29.33 nationally, so the labor part of a national price is scaled by 1.198 (+19.8%).

On this job the labor portion is $5,000 to $10,000 at national rates and $6,000 to $12,000 at Merrimack rates, so the midpoint rises $1,500 above the national figure. Against the New Hampshire statewide wage it is $90 lower. Materials are priced at the national figure: shingle, lumber and equipment prices are set by distributors, not by a town.

A second published benchmark points the same way for the region: Remodeling's 2025 Cost vs Value report prices its “HVAC Conversion, Electrification” job at $19,500 nationally and $22,200 in New England. Those are fixed specification jobs, not per-square-foot prices, so they are shown for comparison only.

Merrimack at a glance

Merrimack had 29,325 residents in the state's 2025 estimate, up 15% from 25,494 in 2010, faster than the state's 7.5% over the same years. Its density of 909 people per square mile puts it 6 of 19 among the towns on this site.

88.9% of Merrimack's occupied homes are lived in by their owners, more than the 72.8% statewide, and the median owner-occupied home is valued at $458,600 (New Hampshire: $402,500). The midpoint estimate for this heat pump works out to 3.6% of that median value.

Before asking for quotes

Other projects in Merrimack

Deck building cost in Merrimack

Heat pump installation in nearby towns

TownLabor areaEstimatePermit
HudsonManchester-Nashua$11,000–$22,000$75
ManchesterManchester-Nashua$11,000–$22,000from $55
New IpswichManchester-Nashua$11,000–$22,000from $100
BowCentral NH$10,200–$20,400$75
ConwayNorthern NH$10,950–$21,900$75

More: all heat pump installation town pages · permit fees by town · labor costs in New Hampshire

Sources

All figures checked October 20, 2026. Estimates are ranges built from published averages, not quotes; a contractor's price depends on the house, access, the season and the scope written into the quote. Cost by Town does not perform or arrange work.