Strafford County · Boston-Cambridge-Newton labor area · 15,264 residents
Home project costs in Durham, NH
What a roof, siding, deck, fence, driveway or heat pump costs in Durham after national installed prices are adjusted for local trade wages. 5 of the six have their own page here because the town's fee schedule sets a permit fee for them.
- 1Roof $8,600–$13,200
- 2Siding $6,750–$20,200
- 3Deck $8,850–$17,700
- 4Driveway $3,500–$8,200
Six projects at their reference sizes
| Project | Size, material | Estimate | Permit |
|---|---|---|---|
| Roof replacement | 2,000 sq ft, architectural | $8,600–$13,200 | $126.21 |
| Siding replacement | 1,500 sq ft, vinyl | $6,750–$20,200 | $144.15 |
| Deck building | 320 sq ft, pressure-treated | $8,850–$17,700 | $142.94 |
| Fence installation | 150 linear ft, wood | $3,250–$8,300 | no line |
| Driveway paving | 600 sq ft, asphalt | $3,500–$8,200 | $100 |
| Heat pump installation | 2,000 sq ft home, ducted air-source | $11,450–$22,850 | $170.07 |
“No line” means the town's schedule, as read on October 20, 2026, sets no fee this site could apply to that work; the building department can say whether a permit is needed.
Labor index by trade
Strafford County sits in the Boston-Cambridge-Newton, MA-NH. Each project's labor is scaled by the trade that does it:
| Trade | Local median | US median | Index |
|---|---|---|---|
| Roofers | $31.90 | $26.65 | +19.7% |
| Carpenters | $36.16 | $29.12 | +24.2% |
| Construction laborers | $30.49 | $22.66 | +34.6% |
| Paving, surfacing and tamping equipment operators | $32.94 | $25.64 | +28.5% |
| Cement masons and concrete finishers | $30.23 | $27.41 | +10.3% |
| HVAC mechanics and installers | $37.75 | $29.33 | +28.7% |
* BLS publishes no estimate for this trade in the Boston-Cambridge-Newton area; New Hampshire statewide median used. Wages: BLS 2025 wage data via O*NET OnLine.
The Boston-Cambridge-Newton area BLS uses for Strafford County is mostly Massachusetts, where trade wages run higher than in New Hampshire. The statewide New Hampshire medians are shown on each project page next to the area figure, so the gap is visible rather than hidden in one number.
Durham in numbers
Durham had 15,264 residents in the state's 2025 estimate, up 4.3% from 14,638 in 2010, slower than the state's 7.5%. Since the 2020 census the count has slipped 1.5%. Its density of 677 people per square mile puts it 9 of 19 among the towns on this site. 6,925 of those residents (45.4%) live in group quarters such as dormitories or care homes, so fewer people live in owner-occupied houses than the headline count suggests.
64.4% of Durham's occupied homes are lived in by their owners, fewer than the 72.8% statewide, and the median owner-occupied home is valued at $504,300 (New Hampshire: $402,500).
The town's permit schedule
Read from Town of Durham, Fees - Permits and Inspections (effective December 16, 2025). The lines this site uses:
“New construction, additions, alterations (one- and two-family): Application fee of $50 plus $7 per thousand of construction cost”
“Electrical, Plumbing, Mechanical, Fire Suppression and Fire Detection Permits-Residential: Application fee of $50 plus $7 per thousand of construction cost”
“Driveway Permits-Residential: $100 (permits to be obtained through the Department of Public Works)”
Nearby towns
Same labor area (Boston-Cambridge-Newton): Exeter · Londonderry · Portsmouth · Rochester · Salem · Somersworth.
All towns: town list · Guides: permit fees by town, labor costs in New Hampshire
Population: NH Office of Planning and Development, 2025 Population Estimates of New Hampshire Cities and Towns (published July 17, 2026); housing: Census QuickFacts, Durham (ACS 2020-2024). Checked October 20, 2026. Estimates are ranges from published averages, not quotes.